实验室2016年发表论文情况
序号 | 论文名称 | 作者 | 刊物名称 | 备注 |
1 | Fracture strength and Weibull analysis of Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen transport membranes evaluated by biaxial and uniaxial bending tests. | 王醴 | Materials Science and Engineering: A | SCI |
2 | Higher moments and probability distribution of maintenance cost in the delay time model. Proceedings of the Institution of Mechanical Engineers | 程天锦 | Part O: Journal of Risk and Reliability | SCI |
3 | Health index synthetization and remaining useful life estimation for turbofan engines based on run-to-failure datasets | 施健明 | Maintenance and Reliability | SCI |
4 | Thermal behavior of regolith at cold traps on the moon׳ s south pole: Revealed by Chang׳ E-2 microwave radiometer data | 魏广飞 | Planetary and Space Science | SCI |
5 | Inversions of subsurface temperature and thermal diffusivity on the Moon based on high frequency of Chang’E-1 microwave radiometer data | 魏广飞 | Icarus | SCI |
6 | Electrostatic migration of lunar dust on sunlit surface: A primary theoretical result. | 甘红等 | Acta Petrologica Sinica | SCI |
7 | Difference of brightness temperatures between 19.35 GHz and 37.0 GHz in CHANG’E-1 MRM: implications for the burial of shallow bedrock at lunar low latitude | 于雯 | Frontiers of Earth Science | SCI |
8 | Spectral characterizationof acid weathering products on martian basaltic glass | Marcella Yant | Journal of Geophysical Research - Planets, | SCI |
9 | Abundance and distribution of radioelements in lunar terranes: Results of Chang'E-1 gamma ray spectrometer data | 陈剑 | Advances in Space Research | SCI |
10 | Lunar iron and optical maturity mapping: Results from partial least squares modeling of Chang'E-1 IIM data | 凌宗成 | Icarus | SCI |
11 | 低温低压条件下辉石粉末的热导率实验分析: 对月球及火星表面热环境研究的指示 | 于雯 | 岩石学报 | SCI |
12 | 存在初始“传导盖层”的月球岩浆洋演化与月壳成因 | 许英奎 | 岩石学报 | SCI |
13 | 南极普通球粒陨石风化等级的重新厘定 | 尚颖丽 | 岩石学报 | SCI |
14 | 月球的全球构造格架初探 | 郭弟均 | 地球物理学报 | SCI |
15 | 月球典型撞击坑溅射物研究及对地质编图的意义. | 郭弟均 | 岩石学报 | SCI |
16 | 云海撞击盆地的恢复及其地质演化研究 | 籍进柱 | 岩石学报 | SCI |
17 | 月球东海盆地综合解析与撞击初始条件的研究 | 刘敬稳 | 岩石学报 | SCI |
18 | 月球雨海地区玄武岩岩浆充填活动期次的重新厘定及地质意义 | 王庆龙 | 岩石学报 | SCI |
19 | 嫦娥一号干涉成像光谱仪数据再校正与全月铁钛元素反演 | 凌宗成 | 岩石学报 | SCI |
20 | Study on upconversion luminescence and thermal properties of Ho3+/Yb3+ co-doped La2O3-TiO2-ZrO2 glasses | 张明辉 | Journal of Alloys and Compounds | SCI |
21 | Achieving high-performance planar perovskite solar cells with co-sputtered co-doping NiOx hole transport layers by efficient extraction and enhanced mobility | 黄爱彬 | Journal of Materials Chemistry C | SCI |
22 | One steop spray-coated TiO2 electron-transport layers for decent perovskite solar cells on large and flexible substrates | 黄爱彬 | Nanotechnology | SCI |
23 | Transparency, photoluminescence and X-ray luminescence study of Eu3+ doped mayenite glass | 段蛟 | Materials letters | SCI |
24 | Fast and controllable crystallization of perovskite films by microwave irradiation process | 曹启鹏 | ACS Applied Materials & Interfaces | SCI |
25 | Crystallization mechanism and kinetics of mayenite glass prepared by aerodynamic levitation method | 段蛟 | Functional Materials Letters | SCI |
26 | A review on InGaSb growth under microgravity and terrestrial conditions towards future crystal growth project using Chinese Recovery Satellite SJ-10 | 余建定 | Microgravity Science and Technology | SCI |
27 | FrameFab: Robotic Fabrication of Frame Shapes | 黄一讲 | ACM Trans. on Graphics | SCI |
28 | CofiFab: Coarse-to-Fine Fabrication of Large 3D Objects | 宋鹏 | ACM Trans. on Graphics | SCI |
29 | Construction of Manifolds via Compatible Sparse Representations | 王睿旻 | ACM Trans. on Graphics | SCI |
30 | Milling Tool Wear Monitoring Through Time-frequency Analysis of Sensory Signals | 施健明 | IEEE International Conference on Prognostics and Health Management | EI |
31 | A data-driven prognostics approach for RUL based on principle component and instance learning | 李永祥 | IEEE International Conference on Prognostics and Health Management | EI |
32 | Group maintenance policy for mechanical products based on age replacement. | 贾新建 | Advances in Engineering Research | EI |
33 | Study on optimal inventory strategy for worn spare parts of Chinese Space Station. | 贾新建 | IEEE ICRMS. | EI |
34 | Application of additive manufacturing technology for space | 王功 | Chin. J. Space Sci. | EI |
35 | 嫦娥二号γ谱数据反演月表Fe元素分布 | 陈剑 | 中国科学:物理学 力学 天文学 | 其他 |
36 | 基于1.4μm红外光谱测量磷灰石结构水的定量方法探讨 | 陈林 | 地球科学进展 | 其他 |
37 | 风化作用对普通球粒陨石物理性质的影响 | 石峰 | 矿物学报 | 其他 |
38 | 空间站离心机带传动系统多体动力学分析. | 李腾飞 | 机械传动 | 其他 |
39 | 空间站工程空间激光安全工程技术研究 | 王伟 | 载人航天 | 其他 |
40 | 载人航天医学要求及其在空间应用系统的适用性分析 | 王伟 | 质量与可靠性 | 其他 |